Since I’ll be getting a mazda3 in a few days, I thought I’d research the upgrade to a new sound system.
http://www.mazdas247.com/forum/showthread.php?123801903-Diffrence-between-04-05-Mazda3-radio-and-06-09-mazda3-radio
Shooting with a flash often needs an assistant to keep moving the flash around to track the moving subject, as the camera also moves to track the subject.
In some situations where an assistant is either not available or not practical. In these situations the flash is set in a location which would cover most subject locations, with a wide flash beam. Lots of flash power is wasted, and it’s very inefficient.
What if the flash(s) could track the subject by themselves, always aiming the flash at the subject? Well, it may be possible using one of these Direction Finder tools.
The way it would work is that the flash (with a remote trigger) would be on a servo controlled gymbal, and the camera would paint the subject with a pulsed IR laser (pulsed so that the tracker only tracks the pulsed signal and not other continuous IR sources).
At the end of the thread, there’s a link to a whole bunch of hobby oscilloscopes!
http://forum.sparkfun.com/viewtopic.php?t=18548
This PC based scope looks promising:
New to the Lab: QuantAsylum QA100 Oscilloscope & XMOS USB Audio
Talk of other bench oscilloscopes
http://www.diyaudio.com/forums/equipment-tools/181052-400-oscilloscope-fft-spectrum-analysis.html
Friday night (night before Neurodance) I was putting together my camera bag. Discovered that with the AC3 on the Pocketwizard TT1, I would not be able to use the Auto Focus assist tool that I made. Also, with the TT1 between the camera and the AF assist tool, the AF assist tool sits an inch higher then before. This throws off the alignment of the laser beam and the camera center AF point. Continue reading
In concert photography, where light is at a minimum, the capturing of images is tough. But sometimes, bright lights flood the stage in often seemingly random intervals and for brief periods of time. I’m not talking strobes, but spot lights that come on and then go off again in matter of 1 second. Enough time for me (the photog) to realize there’s lots of light, but by the time I push the shutter, the light is gone.
Yes I realize that training the photographer is simpler and cheaper, but I’m a geek that like to build shit.
Build some sort of device that triggers the camera to take a photo which when turned on will focus and snap a photo based on light levels passing a certain threshold. The light sensitive are should be directional. I don’t want it going off just because buddy’s flash went off 3 feet from me.
In the search for a focus solution, I am going to abandon the laser pointer light source in favor of an AF assist light from a proper flash unit.
Doing some research here and looked at a whole bunch of flashes, and some of the flash manuals have a range in which the AF illuminator/assist light is effective. The listed number is the max range listed in the official user manual (in meters and feet). Continue reading
To layout the expectations for the next AF assist tool. The last AF assist tool v2.0 had it’s weaknesses, and I will try to address some/all of those with the next tool.
Some of the changes from v2.0 to v3.0:
– Explore the use of other AF lights. Try lights with grids from existing flashes, near IR leds, (others) to achieve a pattern/light that is both not distracting to anyone and not very visible yet enables a DSLR to quickly focus.
– Follow and recreate some of the efforts out there to reverse engineer the ETTL protocol and use it to keep the tool on ONLY while the camera is focusing. The two sources for the reversed-engineered protocol are on Kzar.net and Bill Grundmann’s Blog. I’ve wanted a project for an Arduino, and this may be the one.
Some more efforts to create an AF assist light:
http://www.flickr.com/groups/strobist/discuss/72157625363074208/
asa
I recently attended a 5 day music festival (Kinetik Festival) in montreal, Canada where I was asked to photograph the 35 bands playing. A month before the festival I had a chance to try out my first AF Assist tool. After seeing the results I knew I wanted to take such a helpful tool with me to the music festival to help in the making of images. This is the second incarnation of my AF Assist tool. Continue reading
Continuation of AF Assist v2 post.
The change o the op-amp did not do the trick as expected. In fact even though the NE5532 has a much quicker slew time, I didn’t make a difference. In fact I think it made things worse. Continue reading
Continuation from this post. Build and experimentation log continues.
I built the unit and tested it last week. The laser seemed lower power then the first one I built (which was just the laser pointer hooked up to a set of 3 AAA batteries along with a pushbutton).
Last night I had time to take a multimeter to it. The laser LED is seeing a total of 3.4V from the output of the LM358 OpAmp. The rail voltage was 4.6V (3 AAA bateries) yet the maximum I could coax the output to put out was 3.3V – 3.4V. This explains why the laser beam seemed weaker at first try.
I’m really going blind here using an OpAmp. Did lots of googling, but found nothing to explain this behavior. I tried several LM358, and they all worked the same way. It must be how they work.
So after an hour of dead end attempts and research, I decided to add a 4th AAA battery (for a total of 4 AAA) to give the op-amp 6V, and that did the trick. Now the laser LED sees 4.3-4.4V, and the brightness is back to what I remembered. Continue reading