Meeting with Jason for the past few times has inspired me to get back into writing code. More importantly writing code differently. Writing better code.
So I’m going back to the Spa website to continue the work on that site.
Meeting with Jason for the past few times has inspired me to get back into writing code. More importantly writing code differently. Writing better code.
So I’m going back to the Spa website to continue the work on that site.
– caulking in the kitchen and downstairs bathroom
– replace burnt bulbs throughout the house
– fix trim in kitchen and dispose of it
– sand and paint radiator covers
–> need to buy some paintbrushes
– finish front step (apply the product to the right side)
–>now need work on smaller areas that require attention.
–> Need to find another product (garage floor paint?) to cover up the steps.
– stain coat rack in front hall
– frost front bedroom window
– frost baby bedroom window above change table
– finish master bedroom -> closet, paint, baseboards, fix hole
– finish basement fireplace surround
– put up suspended ceiling in basement
–>need 20+20 cross Tees, and 5 wall railings. Total sq.footage is 360 sq-ft.
–> install panels.
– paint railing in front of house
– get a latch for the door to the furnace room
– install an ethernet connection to the spare bedroom.
It has always bothered me that I need to dial 1 in front of any long distance number witing north america.
Found a dial plan that supposedly eliminates the need to dial the one. Just dial the area code and the number.
Old dial plan: (*xx|[23456789]11|0|[2-9]xx[2-9]xxxxxx|[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxxS0|011xxxxxxxxxxxx.)
New dial plan (Aquired from HERE.): (*xx|[3469]11|0|00|[2-9]xx xxxx|[0]xxx xxx xxxx|xxxxxxxxxx|xx xxx xxx xxxx.|*xx*xx.)